Ireland · Measured quantities · Subcontract packages · Staged release

Quantity Takeoff and Construction Takeoff Services in Ireland

When three tenders close in the same fortnight, measuring is usually what holds up the price. Optimar Precon takes off metric quantities from your drawings, trade by trade, laid out to ARM4 or your own format. Your estimators can then spend their time on rates and suppliers.

  • House-type multipliers for schemes, typical floors for apartments
  • Trade packages ready to send to Irish subcontractors and suppliers
  • Trades released one at a time, so pricing starts early

Irish Takeoff Quote

List the trades you need and the tender closing date. We’ll reply with a fee and a release plan.

29+Years of group experience
3,270+Projects completed
98%Client retention
ISO9001 & 27001 certified
Where the quantities are

Half of Ireland’s New Homes Are Scheme Houses

How 2025 completions split, and what that means for takeoffs.

50.5%of 2025 completions were scheme houses, measured per house type
33.2%were apartments, measured per typical floor
4,664homes completed in Dublin in Q4 2025 alone
11,994homes completed nationally in that quarter

CSO new dwelling completions, 2025. Repetition is where a structured takeoff saves the most time.

Measured for Irish pricing

Quantities That Match How You Price

A takeoff is only useful if it fits your pricing sheet. We set ours up to match how Irish estimators and subcontractors work: by house type or floor, by trade package, and in the units your suppliers quote in. You price straight from it instead of reworking it.

×n

House-type multipliers

Each house type measured once and multiplied by the number on the site layout.

Pkg

Trade packages

Groundworks, frame, roofing, drylining, windows and M&E split out for subcontract enquiries.

PDF

Marked-up drawings

Colour-coded PDFs that show what was counted, so any figure can be checked.

Construction drawings being measured for an Irish quantity takeoff
Trades we measure

Takeoffs for Every Irish Trade Package

Order one trade or the whole building.

Groundworks and drainage

Excavation, fill, foundations, drainage runs and manholes for estates and sites.

Earthwork takeoff →

Concrete and reinforcement

Volumes, formwork and rebar tonnage, with bar schedules on request.

Concrete takeoff →

Blockwork and timber frame

Block walls by type, or timber frame panels, studs and sheathing by house type.

Masonry takeoff →

Structural steel

Member tonnage, connections and decking for commercial and industrial frames.

Steel takeoff →

Mechanical and electrical

Heat pumps, ventilation, pipework, containment and fittings counted by system.

MEP takeoff →

Floors and finishes

Floor, wall and ceiling finishes by room, ready for drylining and flooring subcontractors.

Flooring takeoff →
Measured in: BluebeamCostXPlanSwiftExcel
What comes back

A Takeoff You Can Price From Straight Away

Each Irish takeoff includes the following.

ARM4 or your layout

Items described and ordered to ARM4, or to your own pricing template.

Metric units

m, m², m³, tonnes and counts, matching how Irish suppliers quote.

Waste shown separately

Net quantities with waste factors in their own column.

Package sheets

One tab per trade, ready to send out for subcontract quotes.

Query list

Missing information listed for the tender clarification period.

Addendum changes

Revised drawings re-measured, with old and new quantities side by side.

We measure what the drawings show. Rates, risk and the final price stay with your team.

Proof and example scopes

Staged Takeoffs Under a Tight Deadline

A published bid we supported, plus three Irish requests.

Multi-trade takeoff delivered in stages within 96 hours
Success story · General contractor · US

Every trade measured in 96 hours

The contractor came to us halfway through a bid. Takeoffs went out trade by trade so pricing could run in parallel, and the last package arrived three hours before the deadline. We use the same staged approach on Irish tenders.

96 hRequest to final package
14Assumptions written down
~$140KSubstitutions approved
Read the case study →
Example scope · Scheme

Timber frame houses for a 60-unit estate

A builder needs frame, roof and finishes quantities per house type, plus site totals.

You send
House types, site layout
You get
Per-type and site quantities
Typical time
4–5 working days
Example scope · Apartments

Drylining package for a Dublin block

A drylining subcontractor needs partitions, ceilings and boards measured by floor.

You send
Plans, wall types, ceiling plans
You get
Quantities by floor and type
Typical time
2–4 working days
Example scope · Civil

Groundworks for an industrial site

A civil contractor needs earthworks, drainage and paving quantities for a warehouse yard.

You send
Levels, drainage, external works
You get
Cut and fill, drainage, paving
Typical time
3–5 working days

The three cards are example scopes, not completed client projects. See our sample deliverables.

Release plan

Trades Delivered in the Order You Price Them

Drawings in

Upload the tender set and tell us the closing date.

Release plan

A fee and a date for each trade, with long-lead packages first.

Trades out

Each trade sent as soon as it’s measured and checked.

Addenda

Late revisions re-measured and sent back as change lists.

FAQs

Takeoff Services in Ireland: FAQs

What format do the quantities come in?

Excel by default, laid out to match your pricing sheet or ARM4, with marked-up drawings so every quantity can be checked.

Can you measure a full housing scheme by house type?

Yes. We measure each house type once, multiply by the unit count, and measure roads, drainage and external works separately.

Do you measure single trades?

Yes. Groundworks, concrete, blockwork, roofing, drylining, finishes and MEP can each be measured on their own.

How quickly can you deliver?

Most single-trade takeoffs take two to four working days. For larger jobs we send trades in the order you need to price them.

How do I send drawings?

Email support@optimarprecon.com or call +44 74 2787 2167. Large drawing sets can be shared by a cloud link.

Measuring Holding Up Your Price?

Upload the drawings. You’ll get a fee and a trade-by-trade release plan within one working day.

Scroll to Top