CAD Drafting Services in Ireland
An Irish project needs several drawing sets: one for planning, one for the Fire Safety and Disability Access Certificates, one for the Commencement Notice and one for site. Optimar Precon drafts each stage of that sequence for Irish architects, engineers and contractors, so your own team can stay on design and site work.
- Planning sets for one-off houses, housing schemes and apartment blocks
- Compliance drawings for your fire engineer, access consultant and Assigned Certifier
- Remote team, plus a UK office in Chertsey for meetings
Irish CAD Project Enquiry
Tell us the county, the building type and which stage you need drawn. We’ll reply with a fee and turnaround.
36,284 New Homes, Each One Drawn Several Times
2025 had the most new dwelling completions since the CSO series began in 2011.
CSO new dwelling completions, 2025. Every one of these homes went through planning, compliance and construction drawings.
One Design, Four Drawing Sets
The same building gets drawn again for each audience: the planning authority, the fire and access reviewers, Building Control and the site team. Each set has its own rules and level of detail. We keep them all drawn from one master model, so a change made for planning reaches the construction set as well.
Planning
Site layout on the location map, plans, sections and elevations at council scales.
Fire and access
Compartment, escape and accessible-route sheets prepared from your consultants’ mark-ups.
Commencement and construction
General arrangement and detail drawings to go with the Commencement Notice, then the site issue.
CAD Drafting for Every Building Type
The drawing services Irish firms use most, with the detail page for each.
Architectural drawings
Plans, sections and elevations for houses, schemes, apartments and commercial buildings.
Architectural CAD →Structural drawings
Foundations, frames and reinforcement drawn up from your engineer’s design and calculations.
Structural CAD →MEP layouts
Heating, ventilation, plumbing and electrical layouts, including heat pump and MVHR runs.
MEP CAD →PDF and paper to CAD
Old drawings and scans of existing buildings turned into clean, editable DWG files.
CAD conversion →Shop and fabrication drawings
Steel, joinery and façade details for subcontractors and fabricators.
Shop drawings →As-built records
Final drawings for the safety file and the completion certificate.
As-built drawings →Drawing Standards We Work To
Each set is set up the way Irish planners, certifiers and site teams expect.
Council-ready scales
Site location at 1:1000 or 1:2500, site layout at 1:500, buildings at 1:100 or 1:50.
Northing and site notices
North points, boundaries outlined in red and site notice locations shown where the council asks for them.
Part M and Part B sheets
Access and fire information drawn on separate sheets for your consultants to check.
Drawing register
Sheet numbers, revisions and purpose of issue kept up to date.
Your title block
Drawn on your template, so every set carries your practice’s name.
Secure handling
Drawings handled under our ISO/IEC 27001 certified information security.
We prepare drawings from your design. Certification, design responsibility and all submissions stay with your practice and its consultants.
Typical Irish Drafting Requests
One from each stage of the drawing sequence.
One-off house planning set
An engineer needs plans, elevations, a site layout and the location map for a rural house application.
- You send
- Sketch design, site survey, map
- You get
- Planning drawings at council scales
- Typical time
- 3–5 working days
Fire and access drawings for a school extension
An architect needs FSC and DAC drawings prepared from the consultants’ mark-ups.
- You send
- GA drawings, consultant mark-ups
- You get
- Fire and access sheets
- Typical time
- 4–6 working days
Construction set for a housing scheme
A contractor needs house-type drawings and site layouts for a 40-unit scheme.
- You send
- Planning drawings, engineer’s details
- You get
- House types, site plans, details
- Typical time
- 1–2 weeks
These are example scopes, not completed client projects. See our success stories for finished work.
Remote Drafting, Irish Working Day
Share the files
Sketches, surveys, DWGs or PDFs, plus the stage you need drawn.
Fee the same day
A fixed fee and delivery date, usually within one working day.
Overnight progress
Our team is ahead of Irish time, so work moves on before your morning.
Review and issue
You review, we revise, and the set is issued under your name.
CAD Drafting in Ireland: FAQs
Can you prepare drawings for an Irish planning application?
Yes. We draw the site location map, site layout, plans, sections and elevations at the scales councils require, with the site boundary in red and other lands in the applicant’s control in blue.
Do you prepare Fire Safety Certificate and Disability Access Certificate drawings?
We draw them from your fire engineer’s and access consultant’s mark-ups. They review the drawings and make the applications.
Which counties do you cover?
All of Ireland. We work remotely from your files, so the project’s location doesn’t affect the price or turnaround. We have dedicated pages for Dublin, Cork, Galway and Cavan.
How do you fit around the Irish working day?
Our delivery team is ahead of Irish time, so work moves on early in your day. We also have a UK office in Chertsey for meetings.
How is CAD drafting priced in Ireland?
As a fixed fee per drawing set, or a monthly rate for a dedicated drafter. Send your files or Email support@optimarprecon.com or call +44 74 2787 2167 for a quote within one working day.
CAD by location and related services
Drawings Holding Up a Submission?
Send what you have. You’ll get a fixed fee and a delivery date within one working day.