BIM Services in Cork
Cork’s pharma and medtech plants are some of the most service-dense buildings in Ireland. Interstitial floors, clean and black utilities, skids and pipe racks all compete for the same space. Optimar Precon builds and coordinates the MEP and process utility models that contractors and engineering firms need before installation starts on a Cork campus.
- Process utility, HVAC and electrical models coordinated in one federated model
- Clash cycles timed around shutdowns and tie-in windows on live sites
- Scan to BIM of existing plant rooms before an expansion
Cork BIM Enquiry
Tell us the facility type, the disciplines and whether it’s a new building or an expansion of a live site.
Ireland’s Densest Cluster of Process Plants
The manufacturing base behind Cork’s BIM demand.
Industry and public works framework figures, 2025–2026. Process plants have the densest services of any building type, which is where BIM coordination saves the most rework.
Fewer Surprises at Tie-In
Most Cork pharma projects add a new building or suite to a site that keeps running. The riskiest moments are tie-ins to existing utilities, done in short shutdown windows. We model the existing plant from scans and coordinate the new work against it, so the shutdown team works from verified routes instead of guesses.
Existing plant modelled
Plant rooms, corridors and pipe racks modelled from point clouds before design is fixed.
Tie-in points checked
Connection points, isolation valves and access confirmed in 3D before shutdown.
Vendor packages placed
Skid and equipment models from vendors dropped in and checked for space and maintenance access.
Modelling for Ringaskiddy, Little Island and Beyond
Six kinds of BIM work for Cork facilities and buildings.
Process utility modelling
Purified water, clean steam, process gases and drainage routed and coordinated.
MEP BIM →Cleanroom HVAC coordination
AHUs, ducts, HEPA filters and ceiling grids coordinated within tight interstitial spaces.
Clash detection →Scan to BIM of existing plant
Laser scans of live areas turned into Revit models for expansion design.
Point cloud to BIM →Structural steel and pipe racks
Platforms, racks and supports modelled with the services they carry.
Structural BIM →Equipment families
Revit families for skids and equipment, built from vendor drawings.
Revit families →Federated coordination
All trades combined, with weekly clash reports and a tracked issue log.
BIM coordination →What Cork Site Teams Receive
Made for engineering firms, M&E contractors and site owners.
Coordinated federated model
All trades and existing plant in one model, split into areas.
Tie-in register
Every connection to existing services with location, size and access notes.
Clash reports by area
Issues with viewpoints, owner and due date for each coordination meeting.
Installation drawings
Coordinated layouts and sections cut from the model for the site.
Your site standards
Naming, tagging and numbering that follow the site’s engineering standards.
NDA and secure files
Confidential site data handled under ISO/IEC 27001 controls.
We model from your design and survey data. Process design, validation and approvals stay with your engineers.
Dense MEP, Already Done Once
A published coordination programme on a service-heavy building, plus three Cork requests.
1,268 MEP issues closed before construction release
Five trade models and no lead coordinator. Over 11 weeks, weekly clash cycles filtered the raw clashes down to the real issues and closed them. Cork process buildings bring the same density and the same need for discipline.
New fill-finish suite on a live campus
An engineering firm needs the new suite modelled and coordinated against scanned existing plant.
- You send
- Design, point cloud, vendor models
- You get
- Federated model, tie-in register
- Typical time
- 6–10 weeks
Cleanroom HVAC for a medtech line
An M&E contractor needs ductwork and ceiling services coordinated in a tight interstitial space.
- You send
- HVAC design, architecture model
- You get
- Coordinated model, sections
- Typical time
- 3–4 weeks
Plant room scan to BIM
A site team wants an accurate model of a utility building before planning an upgrade.
- You send
- Point cloud, P&IDs
- You get
- Revit model of existing plant
- Typical time
- 2–3 weeks
The three cards are example scopes, not completed client projects. See more in our success stories.
Planned Around Your Shutdowns
NDA and standards
NDA signed, and the site’s CAD and BIM standards received.
Existing conditions
Scans and records turned into a model of what’s there today.
Coordinate new work
New services added and clash cycles run area by area.
Ready for shutdown
Tie-in register and installation drawings issued before each window.
Cork BIM Services FAQs
Can you model a live process plant from a laser scan?
Yes. We convert point cloud scans into Revit models of the areas you need, including pipework, ductwork, cable trays and equipment, at the level of detail agreed up front.
How do you handle confidential site information?
We sign your NDA before any files arrive and work under ISO/IEC 27001 certified information security, with access limited to the named project team.
Do we need to be on site with you?
No. We work remotely from scans, drawings and photos. Your site team or survey contractor captures the data, and we review models with you online.
Can you coordinate new services against existing ones?
Yes. We model the new systems and run clash detection against the as-built model, so tie-in points and routing conflicts are found before installation.
What does a Cork site project cost?
It depends on the area and detail. Email support@optimarprecon.com or call +44 74 2787 2167 with the scope and scan data, and we send a fixed fee.
Related services
Expansion Planned on a Cork Site?
Tell us the scope and the shutdown dates. We’ll propose a modelling plan around them.