Construction Takeoff Services in the USA
Measuring is the slowest part of most bids, and it’s the work estimators most want to hand off. Optimar Precon provides construction takeoff services in the USA: trade-by-trade material quantities with color-coded mark-ups, set out to match your pricing sheet, so you can price straight from them.
- Quantities by trade, CSI division, floor or area
- Every quantity traceable to a marked-up plan
- Fixed quote within 24 working hours, depending on complexity
US Takeoff Quote
Which trades do you need measured, and when is the bid due?
Your Estimators Price, We Count
An estimator who spends two days measuring a job has two fewer days for pricing, subcontractor coverage and risk. As a takeoff service company working only from your plans, we do the measuring in your format and hand it back with mark-ups, so your team can check any number in seconds.
Need prices as well as quantities? Our takeoff and estimating services add labor, material and equipment costs to the same takeoff.
Your format
Quantities laid out to match your pricing sheet or estimating software.
Color-coded mark-ups
Bluebeam or PDF mark-ups showing exactly what was measured.
Addenda handled
Revised sheets re-measured and changes listed.
Commercial Takeoff Services
Commercial bids carry the most trades and the tightest deadlines. We measure them trade by trade, in the order your estimators need to price.
Offices and retail
Core and shell, tenant fit-outs and pad sites, from sitework to finishes.
Warehouses and industrial
Tilt-up and pre-engineered buildings: slabs, steel, roofing and electrical.
Healthcare and education
MEP-dense buildings with detailed fixture, device and system counts.
Data centers
Power, cooling and containment quantities for data center preconstruction.
Multifamily and residential
Framing, drywall and finishes by unit type and floor.
Public and civil
Earthwork, utilities and paving from civil sets for public bids.
Working outside the US, or need the full service list? See our construction takeoff services hub.
Takeoffs for Every Major Trade
One trade or the whole job.
Concrete and rebar
Footings, slabs, walls and reinforcement by pour or area.
Concrete takeoff services →Structural steel
Members, connections and miscellaneous metals by tonnage.
Structural steel takeoff →MEP
Pipe, duct, conduit, wire and fixture counts by system. Need it priced? See MEP estimating services.
MEP takeoff services →Earthwork and sitework
Cut and fill, utilities and paving from civil sets.
Earthwork takeoff services →Masonry
CMU, brick and accessories measured by wall type.
Masonry takeoff services →Flooring and finishes
Flooring, wall finishes and ceilings room by room.
Flooring takeoff services →A Takeoff You Can Check in Seconds
Every number linked back to the plans.
Quantity workbook
Excel quantities by trade, division and area.
Marked-up plans
Color-coded PDFs or a Bluebeam session.
Waste factors shown
Net quantities with waste allowances listed separately.
Assumption list
Where drawings were unclear and what we assumed.
RFI prompts
Missing details flagged for your RFIs.
Addendum updates
Changes re-measured and highlighted.
Quantities only, unless you’d also like them priced. See our US estimating service.
Staged Takeoffs on a Tight Deadline
A published US bid, plus three typical requests.
Every trade measured in 96 hours
The contractor came to us halfway through a bid. Takeoffs were issued one trade at a time, in the order the estimators needed them, so pricing ran alongside measuring. The last package landed three hours before the deadline.
Multifamily framing and drywall
A drywall contractor needs studs, board and finishes by unit type. See drywall takeoff services.
- You send
- Architectural plans, wall types
- You get
- Quantities by unit and floor
- Typical time
- 2–4 days
Retail pad site
A site contractor needs earthwork, utilities and paving.
- You send
- Civil set, geotech report
- You get
- Cut/fill, pipe, paving quantities
- Typical time
- 2–3 days
Tilt-up warehouse electrical
An electrical contractor needs conduit, wire and devices counted.
- You send
- Electrical sheets, panel schedules
- You get
- Counts and lengths by system
- Typical time
- 2–3 days
The three cards are example scopes, not completed client projects. See more in our success stories.
Three Ways to Work With Us
Pick the model that fits your bid volume. Every job starts with a fixed quote within 24 working hours, depending on complexity.
Fixed price per takeoff
One fee per trade or per plan set, agreed before we start. Best for occasional bids.
Hourly takeoff support
Billed by the hour for overflow work, addenda and change orders.
Dedicated estimator
A full-time takeoff estimator on your team, on a monthly rate, working in your tools.
Bidding every week?
A dedicated estimator learns your pricing sheet, trades and standards, so each takeoff comes back faster than the last.
From Plans to Quantities
Upload plans
PDF or DWG sets by link or email, with the bid date.
Fixed quote
Fee and delivery date within 24 working hours, trade by trade if needed.
Measure overnight
Our team works the plans while your office is closed.
Ready to price
Workbook and mark-ups waiting in the morning.
Construction Takeoff Services in the USA: FAQs
What is the difference between a takeoff and an estimate?
A takeoff measures quantities from the plans. An estimate adds labor, material and equipment pricing to those quantities. We offer both, as separate services or as one takeoff and estimating package.
Do you provide commercial takeoff services?
Yes. Most of our US takeoffs are for commercial projects: offices, retail, warehouses, healthcare, education and data centers. We also take off multifamily, residential and public work.
Do you provide takeoffs in all US states?
Yes. We measure from plans, so we can take off projects anywhere in the USA.
What do you need to start a takeoff?
The full plan set as PDF or DWG, the specifications if available, any addenda, the trades to measure and your bid date.
How do you check takeoff accuracy?
Every takeoff goes through an internal check against the plans before delivery, and the mark-ups let you verify any quantity yourself.
How much do takeoff services cost?
It depends on the trades and the size of the plan set. We price per job, hourly, or at a monthly rate for a dedicated estimator. Send your plans and we’ll return a fixed quote within 24 working hours, depending on complexity.
Can I hire a dedicated takeoff estimator?
Yes. If you bid every week, you can hire a dedicated construction estimator who works only on your projects, in your formats, on a monthly rate.
Related services
Measuring Holding Up Your Bid?
Send the plans today. We’ll confirm a fixed fee and delivery date within 24 working hours.