Data Centre BIM Modelling Services Saudi Arabia
Optimar Precon provides data centre BIM modelling services in Saudi Arabia for contractors and consultants working on campuses in Riyadh, the Eastern Province and Jeddah: federated campus models, coordinated HV and utility corridors and 4D phasing for programmes built across many buildings.
Models follow the client’s BIM standards, are hosted on the client’s chosen common data environment and produce drawings with Arabic titles where required.
Send Your Saudi BIM Scope
Tell us the site, the number of buildings and the client BIM standard, and we will propose a modelling team and programme.
Group-wide figures across all Optimar Precon services.
Federating a Saudi Data Centre Campus
Saudi campuses can include dozens of buildings, their own HV network and kilometres of utility corridors. The model is federated so each part can be worked on separately and checked together.
| Model zone | What it contains | Coordination we check |
|---|---|---|
| HV yard and bulk supply point | Transformers, GIS switchgear and incoming circuits | Clearances, cable entries and access for heavy equipment |
| Utility corridors | HV and MV cables, water, fuel and fibre routes | Crossings and separation between services |
| Central plant | Chillers, pumps, cooling towers or dry coolers | Pipe routes to each data hall |
| Generator yards | Generators, fuel storage and exhaust | Stack positions and fuel delivery routes |
| Data halls | Containment, power distribution and cooling units | Busway, tray and pipework congestion |
| Site infrastructure | Roads, drainage and security perimeter | Conflicts between buried services and roads |
Each zone is a separate model linked into the federated campus model, so teams can work in parallel without overwriting each other.
Working to Saudi Client BIM Requirements
Large Saudi clients often set their own BIM standards. The model set-up follows them from the first exchange.
Client BIM Standards
Model structure, naming and level of detail set to the client’s BIM manual or EIR.
In-Kingdom Data Hosting
Models hosted on the client’s chosen common data environment, including in-Kingdom hosting where required.
Bilingual Drawings
Drawings produced from the model with Arabic titles and labels where the client requires them.
Civil Defense Layouts
Fire protection layouts coordinated for SBC 801 review and Civil Defense approval.
4D Sequencing for Multi-Phase Saudi Programmes
Linking the model to the programme shows how each phase is built and where phases overlap.
| 4D output | What it shows | How it helps |
|---|---|---|
| Phase sequence models | Order of buildings, plant and corridors | Confirms enabling works are ready before each phase |
| Crane and laydown plans | Crane positions and storage areas | Avoids clashes between active phases |
| Live-site interfaces | Where new work meets operating halls | Plans tie-ins without disrupting live load |
| Equipment delivery routes | Paths for transformers and chillers | Checks access for oversized loads |
| Progress comparisons | Planned against actual model progress | Shows slippage early |
Saudi Data Centre BIM Deliverables
Federated Campus Model
HV yard, corridors, central plant and data halls in one coordination model.
Revit MEP Models
Electrical, mechanical, plumbing and fire protection models for each building.
Clash Reports
Navisworks clash tests with issues tracked to closure.
4D Sequence Models
Phase-by-phase construction sequences linked to the programme.
Bilingual Drawing Sets
Coordinated drawings with Arabic titles where required.
As-Built Models
Verified models with asset data for each phase.
Related services: Saudi Arabia data centre preconstruction, Saudi Arabia data centre estimating, preconstruction services Saudi Arabia, data centre MEP clash detection case study, US data centre BIM modelling.
Coordinating a Multi-Building Campus?
Send the site plan and phase programme, and we will scope the federated model and 4D sequencing.
Saudi Arabia Data Centre BIM Modelling: FAQs
How do you model a large Saudi data centre campus?
The campus is split into linked models for the HV yard, utility corridors, central plant, generator yards and each data hall, then federated so the whole site can be coordinated together.
Can you coordinate HV networks and utility corridors?
Yes. HV and MV cables, water, fuel and fibre routes are modelled with their separation requirements, and crossings with roads and drainage are checked before construction.
Do you work to Saudi client BIM standards?
Yes. Model structure, naming and level of detail follow the client’s BIM manual or exchange information requirements from the first model exchange.
Can models be hosted in the Kingdom?
Yes. Models are delivered to the client’s chosen common data environment, including in-Kingdom hosting where the client requires it.
Do you provide 4D sequencing for phased programmes?
Yes. The model is linked to the programme to show phase sequences, crane and laydown plans, equipment delivery routes and tie-ins to operating halls.
Which working week do you cover for Saudi projects?
Our India team is two and a half hours ahead of Riyadh, so model reviews are held within Saudi business hours, and exchanges are planned around the Sunday to Thursday working week.
Coordinate Saudi Campuses Building by Building
Federated models, utility corridors and 4D phasing for programmes at national scale.