Data Centre Preconstruction Services Germany
Optimar Precon supports general contractors and building services (TGA) contractors in Germany with data centre preconstruction services: cost plans to DIN 276, bills of quantities for GAEB tenders, MEP takeoff and BIM coordination for data centres built under the Energy Efficiency Act.
Coordinated from our UK office, one hour behind German time, with estimates that carry efficiency, heat reuse and metering scope from the first cost plan.
Send Your German Project
Tell us the location, HOAI work stage and cost groups to price, and we will reply with a proposal and timeline.
Group-wide figures across all Optimar Precon services.
How the Energy Efficiency Act Changes German Data Centre Scope
Germany’s Energy Efficiency Act (EnEfG) sets efficiency, renewable power and heat reuse rules for data centres with 300 kW or more of non-redundant connection capacity.
| Requirement | EnEfG rule | What it adds to the build |
|---|---|---|
| PUE, new facilities | 1.2 or lower for data centres starting operation from 1 July 2026 | High-efficiency cooling plant, free cooling and full metering |
| PUE, existing facilities | 1.5 from 1 July 2027 and 1.3 from 1 July 2030 | Cooling and controls upgrades on live sites |
| Energy reuse factor | 10% for facilities starting from 1 July 2026, rising to 15% and then 20% for later start dates | Heat recovery plant, heat pumps and a heat network interface |
| Renewable electricity | 50% since 2024 and 100% from 1 January 2027 | Mostly procurement, plus metering and any on-site generation |
| Energy management | Energy or environmental management system with continuous metering | Sub-metering, power monitoring and BMS points |
Exemptions apply in some cases, for example where no heat network operator will take the heat. We confirm which rules apply with your project team before pricing.
Pricing Waste Heat Recovery in German Data Centres
Heat reuse turns part of the cooling system into an energy supply. Each element is priced as its own package so the scope boundary with the heat network is clear.
Heat Recovery Plant
Heat exchangers on chilled water or liquid cooling loops, sized to the reuse target.
Heat Pumps
Plant to raise recovered heat to the temperature a district heating network needs.
Heat Transfer Station
The interface with the heat network operator, including metering and controls.
ERF Metering
Meters to measure reused energy against total consumption for annual reporting.
Off-Site Pipe Routes
Trenching and pipework to the network, with the ownership boundary agreed early.
Liquid Cooling Synergy
Higher return temperatures from liquid cooling make heat reuse more efficient.
German Standards and Estimate Structure
| Area | German reference | How we deliver it |
|---|---|---|
| Cost structure | DIN 276 cost groups, with building services under cost group 400 | Estimates structured by cost group |
| Design stages | HOAI work stages (Leistungsphasen) | Cost estimate, cost calculation and cost approval matched to each stage |
| Bills of quantities | Leistungsverzeichnis to VOB, exchanged in GAEB format | Priced BoQs set up for GAEB tenders |
| Electrical | VDE standards and DIN EN 50600 | Electrical scope priced to the standards specified |
| Currency and tax | EUR, net of 19% VAT | VAT shown separately |
Preconstruction Services for German Data Centres
DIN 276 Cost Plans
Cost estimates and cost calculations for developers and design teams.
TGA Bid Estimates
Priced BoQs for building services contractors bidding data centre packages.
MEP Takeoff
Quantities by system, hall and phase for your own pricing.
Heat Reuse Estimates
Heat recovery, heat pump and network interface packages priced separately.
BIM Coordination
Coordinated Revit MEP models, clash-checked in Navisworks, to the employer’s BIM requirements (AIA).
Dedicated Teams
Full-time estimators or BIM coordinators working close to German hours.
Service details: data centre estimating Germany, data centre BIM modelling Germany, construction estimating Germany, construction takeoff Germany, preconstruction services Germany, BIM services, shop drawings, dedicated professionals.
Tendering a German Data Centre?
Send the LV, drawings and tender date, and we will confirm what we can price before submission.
German Data Centre Projects Moving Beyond Frankfurt
Large new German campuses are being planned outside the established Frankfurt market, bringing grid and heat reuse scope with them.
Multi-Building Campus in Eastern Germany
Brandenburg, near the Polish border- Scale
- Up to six 60 MW buildings, about 360 MW in total (reported estimate)
- Investment
- Around €3.5 billion, as reported by local officials
- Status
- Planned; full details not yet public
- Power
- Likely to need a new on-site substation
Preconstruction takeaway: campuses outside Frankfurt bring substation, grid connection and heat reuse scope into the estimate from the first cost plan.
Anonymized examples of publicly reported German projects, shown for market context. These are not Optimar Precon projects, and figures may have changed since the dates shown.
Germany Data Centre Preconstruction: FAQs
How does the Energy Efficiency Act affect data centre construction in Germany?
New data centres starting operation from 1 July 2026 must reach a PUE of 1.2 or lower and reuse at least 10% of their energy, rising for later start dates. That adds high-efficiency cooling, heat recovery, heat pumps and metering to the construction scope.
What is the energy reuse factor requirement?
The energy reuse factor is the share of a data centre’s energy that is reused, usually as heat. Under the EnEfG it starts at 10% for facilities beginning operation from 1 July 2026 and rises to 15% and 20% for later start dates, with exemptions in some cases.
Do you prepare data centre estimates to DIN 276?
Yes. Estimates are structured by DIN 276 cost group, with building services under cost group 400, and matched to the HOAI work stage of the design.
Can you price bills of quantities for GAEB tenders?
Yes. Bills of quantities can be priced and set up for tenders exchanged in GAEB format, so they can be used in German tendering software.
Which electrical standards do you price German work to?
Electrical scope is priced to the VDE standards and DIN EN 50600 requirements specified for the project.
How do you work with German project teams?
Coordination runs from our UK office, one hour behind German time, with ISO/IEC 27001 certified handling of project documents and ISO/IEC 27701 privacy controls that support GDPR obligations.
Build German Data Centres to the Efficiency Act
DIN 276 cost plans, GAEB bills and BIM with efficiency and heat reuse scope built in.