Mechanical, Electrical, Hydraulic and Fire

MEP Estimating Services in Australia

Optimar Precon prepares MEP takeoffs and priced estimates for Australian services contractors, head contractors and quantity surveyors who need accurate numbers on more tenders than their in-house team can handle.

We measure every duct, pipe, cable, fitting and device from your drawings, apply your labour and supply rates, and return a bid-ready estimate you can check line by line.

Quick answer: MEP estimating services in Australia cover quantity takeoff and cost estimates for mechanical (HVAC), electrical, hydraulic and fire services packages. Optimar Precon delivers itemised Excel estimates with marked-up drawings, and quotes a fixed fee within 24 working hours depending on project complexity.

  • Itemised, checkable quantities
  • Your rates or supplier pricing
  • Dedicated estimators on request
Tender Enquiry

Get an MEP Estimate for Your Australian Tender

Upload or describe the drawings, specification, trade packages required and your tender closing date.

3,270+Projects Completed
29+Years of Group Experience
24 hrsFixed Quote Turnaround
98%Client Retention
The Tendering Pressure

More Non-Residential Work Means More MEP Tenders to Price

Australian Bureau of Statistics figures show non-residential building work reached about $17.0 billion in the December 2025 quarter, up 8.2% on a year earlier. Hospitals, schools, offices, warehouses and data centres all carry heavy services content, and every one of them needs mechanical, electrical, hydraulic and fire services priced before a head contractor can submit.

For services contractors, that means more invitations to tender than estimators to price them. Declining good tenders, or rushing them, both cost money. An offshore estimating team lets you price more work without lowering the standard of each estimate.

What is MEP estimating? MEP estimating is the process of measuring the mechanical, electrical and plumbing (in Australia, hydraulic) components shown in a project’s drawings and pricing the materials, labour, plant and preliminaries needed to install them. The result is a cost estimate used for tendering, budgeting and procurement.

Construction drawings reviewed during MEP quantity takeoff for an Australian project
  • Takeoffs measured by level, zone and system, so you can see exactly where quantities come from
  • Colour-coded marked-up PDFs returned with every estimate
  • Assumptions, exclusions and clarifications listed for your tender letter
Trade Packages

MEP Packages We Estimate for Australian Projects

Order one trade or the full services scope. Each package is measured and priced separately so it can be compared against subcontractor quotes.

ME

Mechanical and HVAC

Ductwork by size and gauge, insulation, grilles and diffusers, AHUs, FCUs, VRF systems, chillers, pumps, chilled and heating water pipework, controls points and commissioning allowances.

HVAC estimating services →

EL

Electrical

Main and distribution switchboards, submains, cable tray and conduit, lighting and emergency lighting, power outlets, earthing, generators and solar PV, priced per point or per metre.

Electrical estimating services →

HY

Hydraulic Services

Sanitary drainage, stormwater, cold and hot water, gas, fixtures and tapware, hot water units, backflow prevention and pump sets, measured to grades and pipe materials specified.

MEP estimating services →

FS

Fire Services

Sprinkler mains and heads, hydrant and hose reel systems, fire pumps and tanks, detection and alarm devices, and occupant warning systems.

MEP takeoff services →

CO

Communications and ELV

Data cabling, comms rooms, security, CCTV, access control and nurse call systems counted by device and cable run.

Ask about ELV packages →

TO

HVAC Takeoff Only

Quantities without pricing, for contractors who prefer to apply their own rates in their own estimating software.

HVAC takeoff services →

Deliverables

What You Receive in an Optimar MEP Estimate

Every estimate is laid out so a senior estimator can review it quickly and defend it at tender interview.

Section What it includes
Quantity schedule Lengths, counts and areas by system, level and zone, linked to drawing references
Material pricing Your supplier rates or agreed market rates, with fittings, supports and waste allowances shown separately
Labour Installation hours by item, multiplied by your crew rates, with access and height factors where relevant
Plant and equipment Major equipment, cranage, elevated work platforms and specialist tools
Preliminaries Supervision, testing and commissioning, as-built documentation and site establishment
Clarifications Assumptions, exclusions, scope gaps and drawing conflicts found during takeoff
Summary Trade totals in your preferred format, with GST shown separately, ready to drop into your tender submission
Australian Cost Drivers

Standards That Change the Price of Services Work

Two projects with similar floor areas can have very different MEP costs once Australian code requirements are applied. Our estimators read the specification for these items rather than pricing from drawings alone.

  • NCC Section J (Part J6): energy efficiency rules for air-conditioning and ventilation affect plant selection, fan and pump efficiency, controls and economy cycles
  • AS 1668.2: mechanical ventilation and outdoor air rates set duct sizes and AHU capacity
  • AS/NZS 3000 (Wiring Rules): cable sizing, RCD protection and switchboard requirements drive electrical quantities
  • AS/NZS 3500: plumbing and drainage rules decide pipe materials, grades and fixture connections
  • AS 2118.1, AS 2419.1 and AS 1670.1: sprinkler, hydrant and detection requirements set fire services scope

Your rates, our quantities

Labour and material costs differ a lot between Sydney, regional Queensland and Perth. That is why we price with the rates you give us, or supplier quotes you share, rather than generic databases.

If you only need quantities, we deliver takeoffs formatted for import into your estimating software.

Request an MEP Quote

Who We Work With

Australian Firms That Use Our MEP Estimators

Mechanical Contractors

HVAC and ventilation contractors pricing commercial, healthcare and industrial tenders.

Electrical Contractors

Firms bidding power, lighting, switchboards and solar on fit-outs and new builds.

Hydraulic and Fire Contractors

Plumbing, drainage, sprinkler and hydrant contractors with tight tender windows.

Head Contractors

Builders checking services subcontract quotes or building a cost plan before quotes arrive.

Quantity Surveyors

QS practices that need extra MEP measurement capacity during busy periods.

Developers

Owners who want an independent services cost check before committing to a design.

Data Centre Builders

Capacity is forecast to rise to about 2,800 MW in 2025/26. Electrical and cooling scope dominates these budgets.

Services Consultants

Engineers preparing pre-tender estimates for clients at design stage.

Process

How an Australian MEP Estimate Moves Through Our Team

Share the tender

Drawings, specification, addenda, trade scope and closing date.

Scope and fee

We confirm packages and a fixed fee within 24 working hours, depending on complexity.

Takeoff

Each system is measured and marked up, with conflicts logged as clarifications.

Pricing and review

Rates are applied and a senior estimator checks the estimate before release.

Issue and revise

You receive Excel and PDFs, and we update the estimate when addenda arrive.

Dedicated Estimators

Add an MEP Estimator Without Adding Local Headcount

When tender volume is steady, a dedicated estimator is often better value than paying per project. Your estimator works only on your bids, learns your rate build-ups and formats, and joins your workflow as part of your team.

  • Full-time estimators trained in Australian MEP terminology and formats
  • Work hours that overlap with the Australian business day
  • Scale up for peak tender season and back down without redundancy costs

Time zone advantage: New Delhi is 4.5 hours behind Sydney and Melbourne (5.5 hours during daylight saving). Your afternoon briefing becomes our working day, so takeoffs and revised estimates are usually ready when your office opens the next morning.

Coverage

MEP Estimating for Projects Across Australia

We price services packages for projects in every state and territory, including:

New South WalesVictoriaQueenslandWestern AustraliaSouth AustraliaACTTasmaniaNorthern Territory

Related services in Australia

FAQs

Frequently Asked Questions About MEP Estimating in Australia

What do MEP estimating services include?

MEP estimating services include quantity takeoff and pricing for mechanical (HVAC), electrical, hydraulic and fire services. Our estimates cover quantities, materials, labour, plant, preliminaries, clarifications and a trade summary.

Do you estimate hydraulic and fire services as well as mechanical and electrical?

Yes. We estimate hydraulic services such as sanitary drainage, stormwater, water and gas, and fire services such as sprinklers, hydrants, hose reels, pumps and detection, alongside mechanical and electrical packages.

Which rates do you use for Australian estimates?

We price with your labour rates and supplier pricing, or agreed market rates, because costs vary between cities and regions. If you only need quantities, we provide takeoffs ready to import into your estimating software.

Do your estimators consider Australian standards?

Yes. Our estimators review the specification for requirements such as NCC Section J, AS 1668.2, AS/NZS 3000, AS/NZS 3500, AS 2118.1, AS 2419.1 and AS 1670.1, because these change plant selection, sizing and scope.

How long does an MEP estimate take?

We confirm scope and a fixed fee within 24 working hours of receiving the documents, depending on project complexity. Delivery time depends on project size and the number of trade packages, and we plan it around your tender closing date.

What format will the estimate be delivered in?

You receive an itemised Excel estimate and colour-coded marked-up PDF drawings. The summary can follow your tender format, with GST shown separately.

Can you update the estimate when addenda are issued?

Yes. We revise quantities and pricing when addenda or revised drawings are issued and highlight what changed from the previous version.

Can we hire a dedicated MEP estimator?

Yes. A dedicated estimator works only on your tenders, learns your rate build-ups and formats, and works hours that overlap with the Australian business day.

Closing a Services Tender Soon?

Send the drawings and closing date. We will confirm the packages and a fixed fee within 24 working hours, depending on project complexity.

Scroll to Top