BIM Support for Australian Project Teams

BIM Modeling Services in Australia

Optimar Precon builds coordinated Revit models, MEP BIM, clash-free services layouts and model-based documentation for Australian head contractors, services subcontractors, consultants and developers.

Our delivery team in New Delhi works a few hours behind the east coast, so models, clash reports and updates issued overnight are waiting for your team at the start of the next working day.

Quick answer: We create and coordinate architectural, structural and MEP models from LOD 200 to LOD 500, run clash detection in Navisworks, and deliver Revit, IFC and NWD files set up to your BIM Execution Plan and ISO 19650 information requirements.

  • ISO 19650-1 certified workflows
  • Fixed quote within 24 working hours
  • Dedicated BIM teams available
Project Enquiry

Discuss Your Australian BIM Project

Share drawings, the BEP or EIR, target LOD, disciplines and programme dates. We reply with scope, team size and a fixed quote.

29+Years of Group Experience
3,270+Projects Completed
98%Client Retention
7+Global Delivery Centres
Why BIM Matters in Australia Now

Government Policy Is Making Coordinated Models the Default

Queensland requires BIM on new state government building projects with a capital cost of $50 million or more. New South Wales has followed with a Digitalisation and Data Policy for state significant infrastructure, a pipeline valued at more than $118 billion, which asks agencies to define information requirements, run common data environments and align with ISO 19650.

The effect flows down the supply chain. Head contractors bidding on public hospitals, schools, rail and justice projects now need subcontractors and consultants who can deliver structured models, not just 2D sets. Private developers are asking for the same thing on large commercial and Class 2 apartment work because coordinated models cut site rework.

What is BIM modeling? BIM modeling is the creation of a data-rich 3D model of a building in which every element, from a wall to a cable tray, carries information such as size, material, system and location. Teams use the model to coordinate trades, detect clashes, produce drawings and extract quantities before construction starts.

Coordinated 3D MEP BIM model of building services prepared for an Australian construction project
  • Models built in Revit to your template, shared parameters and naming conventions
  • Information containers named and status-coded to ISO 19650 and your project’s BEP
  • Exports in RVT, IFC, NWC/NWD, DWG and PDF for consultants who are not on Revit
Our BIM Services

BIM Services We Deliver for Australian Projects

Pick a single package or combine disciplines into one federated model. Each service follows the same review and handover process.

BM

BIM Modeling

Architectural and structural Revit models from design development through to construction issue, built from your drawings, sketches or point cloud references.

BIM modeling services →

ME

MEP BIM

Mechanical, electrical, hydraulic and fire services modelled with real duct, pipe and tray sizes, hangers and clearances so installers can build from the model.

MEP BIM services →

HV

HVAC BIM

Ductwork, plant rooms, AHUs, VAV boxes and chilled water systems modelled with access zones for maintenance and ceiling void coordination.

HVAC BIM services →

CD

Clash Detection

Navisworks clash runs between structure and services, grouped by level and zone, with issue reports your coordination meeting can work through in one session.

Clash detection services →

BC

BIM Coordination

Federated model management, coordination meeting support, issue tracking and model updates across consultants and trade contractors.

BIM coordination services →

CB

CAD to BIM

Legacy DWG and PDF drawings converted into intelligent Revit models for refurbishments, asset records and fit-outs in existing buildings.

CAD to BIM services →

FB

Facade BIM

Curtain wall, cladding and panel systems modelled for fabrication, with fixing details and panel schedules for facade contractors.

Facade BIM services →

QT

Model-Based Quantities

Quantities extracted from the model for estimating and procurement, so cost and design stay linked as the model changes.

Takeoff services in Australia →

DC

Data Centre BIM

White space, power trains, cooling plant and containment modelled for hyperscale and colocation builds where services density is extreme.

Data centre preconstruction →

Level of Development

Which LOD Does Your Australian Project Need?

Most Australian BEPs specify LOD by stage and discipline. The table below shows what each level typically includes in our models, so you can match the scope to your contract.

LOD What the model contains Typical use
LOD 200 Generic systems with approximate size, shape and location Concept and schematic design, early cost planning
LOD 300 Specific elements with accurate dimensions and positions Design development, consultant coordination, authority submissions
LOD 350 LOD 300 plus connections, supports and interfaces between trades Trade coordination and clash resolution before tender or construction
LOD 400 Fabrication-level detail with hangers, fittings and assembly information Shop drawings, prefabrication and installation
LOD 500 Field-verified as-built geometry with asset data Handover, facilities management and digital twin set-up
Built for Australian Requirements

Models That Respect Australian Codes and Standards

A model is only useful if the clearances, zones and systems in it match what will be certified on site. Our modellers work to the requirements your engineers specify and flag anything in the drawings that looks inconsistent with them.

  • National Construction Code (NCC): building class, fire compartments and services penetrations shown as designed
  • AS 1668.2: mechanical ventilation layouts and outdoor air paths carried from the mechanical design
  • AS/NZS 3000: switchboard locations, cable routes and clearance zones modelled for electrical coordination
  • AS/NZS 3500: hydraulic services with falls, grades and fixture connections
  • AS 2118 and AS 1670: sprinkler and fire detection layouts coordinated with ceilings and services
  • ISO 19650: file naming, status codes and CDE workflows as set out in your BEP

What our ISO certifications mean for your data

Optimar Precon (Winqualis Consulting Private Limited) is certified to ISO 19650-1 for information management, ISO 9001 for quality, ISO/IEC 27001 for information security and ISO/IEC 27701 for privacy.

For Australian clients this means project files are handled in controlled environments, access is limited to the assigned team, and our model checks follow a documented quality process rather than individual habit.

Request a BIM Quote

Sectors

Where Australian Clients Use Our BIM Teams

Data Centres

Australia’s data centre capacity is forecast to grow from about 2,180 MW to more than 5,000 MW by 2029/30, with Sydney and Melbourne leading. These buildings are almost entirely services.

Healthcare

Hospitals with medical gases, isolated power and complex ventilation, where ceiling voids leave very little room for error.

Class 2 Apartments

Multi-storey residential where repeated floor plates, risers and penetrations reward early clash checks.

Education

Schools and university buildings procured by state governments that increasingly specify BIM deliverables.

Commercial Offices

Base builds and fit-outs where energy performance targets drive tighter mechanical and electrical design.

Industrial and Logistics

Warehouses, cold stores and manufacturing plants with long-span structure and high-bay services.

Transport and Infrastructure

Stations, depots and civil structures delivered under state digital engineering requirements.

Retail and Hospitality

Shopping centres, hotels and mixed-use buildings with kitchen exhaust and heavy services loads.

How We Work

From Drawings to Coordinated Model in Five Steps

Brief and documents

You share drawings, specifications, the BEP or EIR, Revit template and target LOD.

Fixed quote

We confirm scope, team and programme, and send a fixed quote within 24 working hours depending on complexity.

Modelling

Disciplines are modelled in parallel, with RFIs raised early wherever drawings conflict.

Clash and QA

Internal clash runs and model audits are completed before anything is issued to you.

Issue and update

Models, reports and drawings are issued, then updated through coordination rounds to completion.

Engagement Options

Project-Based BIM or a Dedicated Team

Some Australian firms send us a single building. Others need ongoing modelling capacity without adding local headcount. We support both.

  • Per project: fixed scope, fixed price, defined deliverables and dates
  • Dedicated BIM team: modellers and a coordinator who work only on your projects, inside your standards and tools
  • Build-operate-transfer: we set up and run a BIM team for you, then hand it over when you are ready

Why dedicated teams suit Australian contractors: skilled BIM modellers are hard to hire and keep in Sydney, Melbourne and Brisbane. A dedicated offshore team gives you trained people who already know your template, so each new project starts at full speed instead of with onboarding.

Coverage

BIM Modeling Services Across Australia

We work remotely with project teams in every state and territory, including:

SydneyMelbourneBrisbanePerthAdelaideCanberraGold CoastNewcastleHobartDarwin

Related services in Australia

FAQs

Frequently Asked Questions About BIM Services in Australia

Is BIM mandatory in Australia?

There is no single national BIM mandate. Queensland requires BIM on new state government building projects with a capital cost of $50 million or more, and New South Wales has a Digitalisation and Data Policy for state significant infrastructure that aligns with ISO 19650. Many head contractors and developers also specify BIM on private projects.

What BIM services do you provide for Australian projects?

We provide architectural and structural BIM modeling, MEP BIM for mechanical, electrical, hydraulic and fire services, HVAC BIM, Navisworks clash detection, BIM coordination, CAD to BIM conversion, facade BIM, model-based quantities and data centre BIM.

Do you work to ISO 19650 and our BIM Execution Plan?

Yes. Optimar Precon is ISO 19650-1 certified. We follow the naming, status codes, LOD and CDE workflow set out in your BEP or EIR and build models in your Revit template and shared parameters.

Which LOD can you deliver?

We model from LOD 200 for early design through LOD 300 and LOD 350 for coordination, LOD 400 for fabrication and LOD 500 for as-built handover, depending on what your contract specifies.

Which software and file formats do you use?

We model in Autodesk Revit and coordinate in Navisworks, and can work in AutoCAD and other platforms where required. Deliverables include RVT, IFC, NWC, NWD, DWG and PDF.

How do you handle the time difference with Australia?

Our New Delhi team is 4.5 hours behind AEST and 5.5 hours behind AEDT. Our working day overlaps your afternoon for calls, and work completed after your office closes is ready for your team the next morning.

How quickly can you quote a BIM project?

We provide a fixed quote within 24 working hours of receiving drawings and requirements, depending on project complexity.

Can we hire a dedicated BIM team instead of paying per project?

Yes. We provide dedicated BIM modellers and coordinators who work only on your projects, and we also offer build-operate-transfer arrangements where we set up a team and later hand it over to you.

Is our project data secure?

Optimar Precon is certified to ISO/IEC 27001 for information security and ISO/IEC 27701 for privacy. Project files are kept in controlled environments and access is limited to the assigned team.

Have an Australian Project Ready for Modelling?

Send your drawings and BIM requirements. We will confirm scope, team and a fixed price within 24 working hours, depending on project complexity.

Scroll to Top