Ireland · Planning drawings · Building Control · Construction sets

CAD Drafting Services in Ireland

An Irish project needs several drawing sets: one for planning, one for the Fire Safety and Disability Access Certificates, one for the Commencement Notice and one for site. Optimar Precon drafts each stage of that sequence for Irish architects, engineers and contractors, so your own team can stay on design and site work.

  • Planning sets for one-off houses, housing schemes and apartment blocks
  • Compliance drawings for your fire engineer, access consultant and Assigned Certifier
  • Remote team, plus a UK office in Chertsey for meetings

Irish CAD Project Enquiry

Tell us the county, the building type and which stage you need drawn. We’ll reply with a fee and turnaround.

29+Years of group experience
3,270+Projects completed
98%Client retention
ISO9001 & 27001 certified
A record year for drawings

36,284 New Homes, Each One Drawn Several Times

2025 had the most new dwelling completions since the CSO series began in 2011.

36,284new dwellings completed in 2025, up 20.4% on 2024
18,308were scheme houses, half of the national total
12,047were apartments, up 38.7% in a year
5,929were one-off houses, each with its own planning set

CSO new dwelling completions, 2025. Every one of these homes went through planning, compliance and construction drawings.

The Irish drawing sequence

One Design, Four Drawing Sets

The same building gets drawn again for each audience: the planning authority, the fire and access reviewers, Building Control and the site team. Each set has its own rules and level of detail. We keep them all drawn from one master model, so a change made for planning reaches the construction set as well.

PL

Planning

Site layout on the location map, plans, sections and elevations at council scales.

FSC

Fire and access

Compartment, escape and accessible-route sheets prepared from your consultants’ mark-ups.

BC

Commencement and construction

General arrangement and detail drawings to go with the Commencement Notice, then the site issue.

CAD drawing set prepared for an Irish planning application and building control
Across Ireland

CAD Drafting for Every Building Type

The drawing services Irish firms use most, with the detail page for each.

Architectural drawings

Plans, sections and elevations for houses, schemes, apartments and commercial buildings.

Architectural CAD →

Structural drawings

Foundations, frames and reinforcement drawn up from your engineer’s design and calculations.

Structural CAD →

MEP layouts

Heating, ventilation, plumbing and electrical layouts, including heat pump and MVHR runs.

MEP CAD →

PDF and paper to CAD

Old drawings and scans of existing buildings turned into clean, editable DWG files.

CAD conversion →

Shop and fabrication drawings

Steel, joinery and façade details for subcontractors and fabricators.

Shop drawings →
Delivered in: AutoCADRevit sheetsPDF3D CAD on request
Built for Irish reviewers

Drawing Standards We Work To

Each set is set up the way Irish planners, certifiers and site teams expect.

Council-ready scales

Site location at 1:1000 or 1:2500, site layout at 1:500, buildings at 1:100 or 1:50.

Northing and site notices

North points, boundaries outlined in red and site notice locations shown where the council asks for them.

Part M and Part B sheets

Access and fire information drawn on separate sheets for your consultants to check.

Drawing register

Sheet numbers, revisions and purpose of issue kept up to date.

Your title block

Drawn on your template, so every set carries your practice’s name.

Secure handling

Drawings handled under our ISO/IEC 27001 certified information security.

We prepare drawings from your design. Certification, design responsibility and all submissions stay with your practice and its consultants.

Example scopes

Typical Irish Drafting Requests

One from each stage of the drawing sequence.

Example scope · Planning

One-off house planning set

An engineer needs plans, elevations, a site layout and the location map for a rural house application.

You send
Sketch design, site survey, map
You get
Planning drawings at council scales
Typical time
3–5 working days
Example scope · Compliance

Fire and access drawings for a school extension

An architect needs FSC and DAC drawings prepared from the consultants’ mark-ups.

You send
GA drawings, consultant mark-ups
You get
Fire and access sheets
Typical time
4–6 working days
Example scope · Construction

Construction set for a housing scheme

A contractor needs house-type drawings and site layouts for a 40-unit scheme.

You send
Planning drawings, engineer’s details
You get
House types, site plans, details
Typical time
1–2 weeks

These are example scopes, not completed client projects. See our success stories for finished work.

How it runs

Remote Drafting, Irish Working Day

Share the files

Sketches, surveys, DWGs or PDFs, plus the stage you need drawn.

Fee the same day

A fixed fee and delivery date, usually within one working day.

Overnight progress

Our team is ahead of Irish time, so work moves on before your morning.

Review and issue

You review, we revise, and the set is issued under your name.

FAQs

CAD Drafting in Ireland: FAQs

Can you prepare drawings for an Irish planning application?

Yes. We draw the site location map, site layout, plans, sections and elevations at the scales councils require, with the site boundary in red and other lands in the applicant’s control in blue.

Do you prepare Fire Safety Certificate and Disability Access Certificate drawings?

We draw them from your fire engineer’s and access consultant’s mark-ups. They review the drawings and make the applications.

Which counties do you cover?

All of Ireland. We work remotely from your files, so the project’s location doesn’t affect the price or turnaround. We have dedicated pages for Dublin, Cork, Galway and Cavan.

How do you fit around the Irish working day?

Our delivery team is ahead of Irish time, so work moves on early in your day. We also have a UK office in Chertsey for meetings.

How is CAD drafting priced in Ireland?

As a fixed fee per drawing set, or a monthly rate for a dedicated drafter. Send your files or Email support@optimarprecon.com or call +44 74 2787 2167 for a quote within one working day.

Drawings Holding Up a Submission?

Send what you have. You’ll get a fixed fee and a delivery date within one working day.

Scroll to Top