BIM Modelling and Coordination Services in the UK
Optimar Precon gives UK main contractors, design teams and specialist subcontractors extra BIM capacity: Revit models, federated coordination and clash detection, and ISO 19650-compliant information delivery, produced to your EIR, BEP and CDE rules.
Our UK office is in Chertsey, Surrey. Our production team works ahead of UK hours, so model updates and clash reports are ready before your next coordination meeting.
Request a BIM Scope Review
Attach your EIR or BEP, drawings or models, and your programme.
Fixed quote within 24 working hours, depending on complexity. NDA available on request.
ISO 19650 Information Control on a £25M Manchester University Project
One of our UK engagements, with reported outcomes from the project’s document registers and review records.
Drawings, RFIs and submittals brought under one controlled structure
A 100,000 sq ft university research facility had design and compliance records spread across several platforms and manual registers. We applied ISO 19650 naming, status and revision conventions, set up approval routing for RFIs and submittals, and checked records before each issue across an 18-month programme.
Coordination issues resolved in the model before construction release on a 24 MW hyperscale data center fit-out in the US, using the same federated clash workflow we run for UK teams.
Read case study →BIM Services for UK Contractors and Design Teams
Three core services, scoped as a single model package or ongoing monthly capacity.
BIM modelling
Architectural, structural and building-services Revit models built to your template, shared coordinates and level of information need.
- RIBA Stage 3–4 design models
- Model-based drawings and schedules
- IFC exports for open BIM exchange
Coordination and clash detection
Discipline models federated, tested against your clash rules and grouped into an issue register your project team can act on.
- Rule-based clash tests in Navisworks
- BCF issues and viewpoints
- Weekly coordination cycles
MEP (M&E) BIM
Mechanical, electrical, public health and fire protection systems modelled and coordinated through plantrooms, risers and ceiling voids.
- Plantroom and riser coordination
- Access and maintenance zones
- Installation-ready layouts
Working to UK BIM Standards From Day One
The UK applies ISO 19650 through its own National Annex and conventions. These are the requirements we set up before modelling starts.
EIR, BEP, TIDP and MIDP
We build our deliverables into your task and master information delivery plans so model packages land on the dates your BEP commits to.
UK National Annex naming
Project, originator, volume, level, type, role and number fields, for example PRJ-OPT-ZZ-02-M3-M-0001.
Status and revision codes
S0–S4 suitability codes, P01 preliminary and C01 contractual revisions, managed through your CDE’s work-in-progress, shared and published states.
Uniclass 2015
Objects and systems classified to Uniclass tables where your EIR asks for it, so data stays consistent across disciplines.
Level of information need
Geometry and data set by purpose and stage, not one blanket LOD for every object, in line with BS EN 17412-1.
COBie and the golden thread
COBie handover data when specified, and tidy revision records that help higher-risk building teams keep the golden thread required by the Building Safety Act.
Support across the RIBA Plan of Work
We produce and check information to your requirements. Design responsibility, statutory compliance and formal acceptance through the CDE stay with the appointing party and its appointed professionals.
An Extension of Your BIM Team
Requirements review
We read your EIR and BEP, confirm software versions, coordinates and model breakdown, and list any missing inputs.
Model set-up
Templates, worksets, naming and shared coordinates are configured and checked before production starts.
Production and QA
Models are built and self-checked, then federated and clash-tested before any file leaves our team.
Issue through your CDE
Files go to your CDE with the right status codes, ready for your review at the start of the UK day.
UK BIM Services: Common Questions
Do you have a UK office?
Yes. Our UK office is at 56 Guildford Street, Chertsey, Surrey, KT16 9BE, and you can call us on +44 74 2787 2167. Modelling is carried out by our delivery team in India, which works ahead of UK hours.
Can you work to ISO 19650 and the UK National Annex?
Yes. We follow your EIR, BEP and information delivery plans, use the UK National Annex naming fields and status and revision codes, and issue through your CDE. We have applied these conventions on UK projects such as a £25M university research facility in Manchester.
What do you need to start a BIM project?
Your EIR or BIM requirements, BEP, drawings or existing models, Revit template, shared coordinates, software versions and programme. Point cloud data is needed for existing-building models.
Which software and file formats do you use?
Revit, Navisworks Manage, AutoCAD, ReCap and Tekla Structures, with Autodesk Construction Cloud or your own CDE. We deliver RVT, IFC, NWC/NWD, DWG, PDF, BCF and COBie when specified.
How is BIM work priced, and how do I get a quote?
Either as a fixed price per model package, based on disciplines, floor area and level of information need, or as dedicated modellers on a monthly basis for ongoing work. Send your scope through the form, email support@optimarprecon.com, or call +44 74 2787 2167 (UK) or +1 (469) 210-7530 (USA), and you’ll receive a fixed quote within 24 working hours, depending on complexity.
BIM services by city
UK BIM guides
Have a BIM Scope to Price?
Send your EIR or BEP, models or drawings and programme. You’ll receive a scope, fixed price and delivery dates within 24 working hours, with a UK contact for the rest of the project.